Skip to main content

What's new in SourceMagnet, 16 November 2026

Written by Fredrik Muri Slettestøl

This is what is new in SourceMagnet in the 16 November 2026 release, sorted by area.


​

Procurement

Filters to find and invite the right suppliers

New. Find the suppliers that fit the competition without searching through your whole register. When you invite suppliers, you can filter your own register by county or municipality, industry code and relationship, such as an active or previous contract, and leave out suppliers with a relationship. An administrator can turn custom contract fields into filters, such as yes/no, choices, numbers, amounts or dates, and the number of matches is shown as you filter. The same filters are available in the supplier list under “Companies”.

Video: the invitation step filtered by relationship and by the custom field “Code of conduct signert”

Filter by your relationship with the supplier and by custom contract fields. The number of matching suppliers updates as you choose.

The invitation step filtered by relationship, with the number of matching suppliers

Selected filters appear as chips above the list, and you see how many suppliers match.


​

Doffin notices straight from SourceMagnet

New. Announce from the procurement you are already working in. From 9 November, SourceMagnet sends notices straight to Doffin, and you are notified when Doffin has published or rejected the notice.

The procurement with its Doffin reference

The procurement shows the Doffin reference and the link to the notice.

The notice published on Doffin

The same notice as published on Doffin.


​

Open requests and sharing the supplier portal link

New. Reach more suppliers than the ones you already know. When you publish a private request, you can tick “Also publish openly in the supplier portal”, so the request is visible to everyone there, and a signed-in supplier who has not been invited can click “Register interest” and submit a tender just like an invited one. With the share button you copy the link in the supplier portal, or paste in email addresses, for example from Excel, and SourceMagnet sends the link and shows who it was sent to.

“Share the procurement” with the supplier portal link and who it was sent to

Copy the supplier portal link or send it by email, and see who has opened it.


​

Framework agreements with several suppliers, call-offs and mini-competitions

New. See how much has been called off on each framework agreement, and make your next purchase straight from the agreement. A framework agreement has one supplier agreement per supplier and gathers its call-offs on its own page under Contracts › Framework agreements, with the called-off value against the maximum value. You make a direct call-off to the highest-ranked supplier, or open a mini-competition among the suppliers on the agreement, and the award becomes a call-off contract under the framework agreement. A framework agreement concluded outside SourceMagnet can be registered manually with its suppliers, and suppliers who are not registered can be invited to mini-competitions by email.

A framework agreement with its suppliers and the called-off value against the maximum value

The framework agreement brings together its suppliers and shows how much of the maximum value has been called off.


​

Deadlines and tasks on the home page, and tasks per owner

New. “Deadlines” on the home page now also shows question deadlines and the deadlines on your own tasks, with overdue tasks at the top and highlighted. With “Needs in the queue” and “With you” on the home page, you see the needs that are waiting. On “Overview”, the “Tasks per owner” tab shows open and overdue tasks for each person.


​

Health, social and education services in the correct part of the regulations

Fixed. You answer what kind of service the contract concerns, and health, social and education services (anskaffelsesforskriften vedlegg 3) are then placed in Part I or Part IV instead of Part II or III. In Part IV, the procurement is announced on the form for the simplified regime, with optional ESPD and a standstill period of at least ten days, and open and restricted tender competitions are offered. In Part I, these services get the same procedures as in Part IV.


​

Procedures and checks for Part II procurements

Improved. In a Part II procurement you can now choose “Open tender competition” or “Restricted tender competition” (anskaffelsesforskriften § 8-3), and a draft is moved to the correct procedure when it is reclassified. Before the award is confirmed, you record that updated qualification documentation from the selected supplier has been obtained and checked (§ 8-10 (2)), and the check is shown in the protocol. In a restricted tender competition you can start the dialogue with “New round” once the tender deadline has passed, as in the open one.


​

Contract modification notices on Doffin

New. If an awarded contract is modified with additional deliveries or because of circumstances you could not foresee (FOA § 28-1 first paragraph letters c and d), you announce the modification on Doffin from the procurement with “Announce contract modification”. This applies to FOA Part III and forsyningsforskriften Part II.


​

Prior information notice as the call for competition under Part III

New. If you are not a central government authority, you can announce a restricted tender or a competitive negotiation under FOA Part III with a prior information notice instead of a regular contract notice (FOA § 21-2 (2)). When the competition starts, the suppliers who expressed interest are invited to confirm it. Deadlines are planned from the invitation, and in urgent cases the deadline for requests to participate can be 15 days.


​

The plan as a board

Improved. The plan under “Overview” can be switched between “Timeline” and “Board”. The board shows the same competitions and needs with one column per phase, from needs waiting with the purchasing team, through planned competitions and drafts, to what has been published.


​

More filters in the competition list

Improved. With “+ Filter” you can now filter the list on “Deadline”, “Procedure” and “Regulation”, even when the columns are hidden. “Deadline” has the same preset periods and custom period as the date filters in the contract list.


​

Correct legal references for climate weighting

Improved. The texts on climate weighting now refer to anskaffelsesloven § 5b or § 5c depending on the exception you have chosen, instead of the repealed FOA § 7-9. The standard text for the exception for an insignificant climate footprint follows the conditions in § 5b, and Part IV of the regulations has its correct name.


​

Dynamic purchasing system under forsyningsforskriften

New. Under forsyningsforskriften Part II, above the EEA threshold, you can now choose “Dynamic purchasing system” alongside “Qualification system” and run the system and the competitions under it. Help texts, deadlines and the protocol refer to forsyningsforskriften §§ 22-2 to 22-5. Rejection letters are checked more strictly, so the reason cannot refer to a ground for rejection that is not ticked, and the preview shows the reason as the supplier sees it.


​

Response deadline for tender clarifications

New. When you ask a supplier to submit later, supplement or clarify their tender, the request can have a response deadline, and you can see whether the answer arrived in time. The deadline cannot be set after the tender validity period has expired, and you are told if the tender validity period has already expired. If nobody has answered, the supplier gets a reminder by email and in their notifications the day before the deadline.


​

Justification when the price in the evaluation is overridden

Fixed. If you score a tender on a different price than the one the supplier submitted, you write a justification of up to 4,000 characters. This applies to both public and private competitions. The award letter shows the winner's submitted total and the overridden price separately, and the supplier sees both prices.


​

Shorter deadlines in urgent cases

New. You can mark a procurement as an urgent case, write why it is urgent and set the shorter minimum deadlines the regulations allow (FOA § 20-2 (3) and § 20-3 (5), forsyningsforskriften § 16-2 (3)). The justification is sent with the notice to Doffin in all the languages of the notice.


​

Question about interim injunctions before the contract is concluded

New. Before a contract is registered as concluded in a procurement with a statutory standstill period, you answer whether any supplier has requested an interim injunction, with a reference to the rule that applies. If you answer yes, nothing is registered, and you are told that the contract cannot be concluded until the court has decided the case. This applies to FOA Part III and IV, special services above the threshold and forsyningsforskriften.


​

Changing, extending and closing a qualification system

New. A published qualification system under forsyningsforskriften can now be changed and extended with a change notice on Doffin, and closed with a notice on Doffin. You set up the rules for admission and the categories in the system, and you can remove a supplier with notice under § 13-2 and withdraw the removal before it takes effect.


​

Climate and environment justification when lowest price is chosen

Improved. If you choose “Lowest price” in a procurement under FOA Part II or Part III, or under Part II of forsyningsforskriften, you state how climate and the environment are taken into account and why before the procurement can be published (anskaffelsesloven § 5b). The justification is included in the Doffin notice. If a template would remove a justification you wrote yourself, you are asked first.


​

Award criteria in order of priority

New. You can state the award criteria in order of priority instead of with weights under FOA Part II, and under Part III with a justification for why they are not weighted. The order is shown to suppliers and included in the Doffin notice. Weighted criteria under Part II are listed by weight, highest first.


​

Information withheld from the contract award notice

New. You can keep selected information out of the published contract award notice when publication would harm public interests, a company's legitimate commercial interests or competition, and state the reason (FOA § 21-6 (4) and forsyningsforskriften § 17-6 (4)). In a design contest, the number of participants can be kept out of the result notice.


​

Agreed tender deadline for municipalities and other contracting authorities outside central government

Improved. A municipality, county authority or other contracting authority outside central government can state that the tender deadline has been agreed with the suppliers, and a deadline shorter than the minimum is then accepted (FOA § 20-3 (3), § 20-4 (3) and § 26-7 (3)). This applies to the invitation in restricted tenders and competitive negotiation, and to competitions under a dynamic purchasing system. Central government contracting authorities have the same minimum deadlines as before.


​

Reducing the number of tenders in stages during negotiations

Fixed. In a competitive negotiation with prior notice, you can reserve the right in the wizard to reduce the number of tenders in successive stages (FOA § 23-11). A supplier can then be taken out of the negotiations between rounds, with reasons linked to the award criteria, the protocol shows the reduction, and the supplier is notified in writing. Without the reservation, a supplier leaves later rounds only through rejection or withdrawal.


​

Suppliers see only the main weights

Improved. In public competitions, the supplier sees the weight of each main criterion, for example “Price 40%” and “Quality 60%”, but not the weights of the sub-criteria. In private competitions, the supplier sees no weights. You still see all the weights.


​

Justification when a rejection is reversed

Improved. You can reverse a rejection during the evaluation up until the award decision, and you then write why the supplier is brought back in. Who did it, when and why is shown in the tender's activity and in the protocol, together with the rejection. In dynamic purchasing systems and qualification systems, withdrawing a rejection that has been sent also requires a justification.


​

Undo and redo in the text editor

Improved. The text editor toolbar now has “Undo” and “Redo” buttons, so you can reverse a change without knowing the keyboard shortcuts. The new “Normal text” button turns a heading back into regular text.


​

Assessment of exclusion grounds before qualification

Improved. If a self-declaration (ESPD) states an exclusion ground, you write an assessment before the supplier or the tender can be qualified. This applies to both requests to participate and tenders. In a design contest, the assessment is requested for the winner once the jury has decided.


​

Correct main CPV code

Improved. The CPV field shows which code is the main code, and codes that can only be additional codes are marked “additional code only”. If the main code does not match the contract type, you are told below the field before publishing. Suggestions from “Suggest CPV codes with AI” follow the same rule.


​

Extensions in years or months, announced correctly

Improved. Each extension of the contract is registered in the procurement as a length in years or months and a deadline in months before the contract expires. The Doffin notice states the extensions in the renewal fields, based on what you have registered. The procurement cannot be published with options switched on unless an extension has been added.


​

Justification for framework agreements longer than four years

Improved. If a framework agreement under FOA Part III lasts longer than four years, or has no defined end, the wizard tells you and asks for the special circumstances that justify it. The procurement cannot be published until the justification is written, and the justification goes into the protocol.


​

Responsible buyer as the contact person in the Doffin notice

Improved. Every Doffin notice gives the procurement's “Responsible buyer” as the contact person. If the responsible buyer has no name, the notice is stopped and the summary says why. “Change responsible buyer” tells you that Doffin needs a named contact.


​

Justification for the choice of procedure in the protocol

Improved. In the protocol for a procurement under FOA Part III, the justification for the choice of procedure gets a standard text. For open and restricted tenders, the whole justification is written for you, because they are always permitted under FOA § 13-1 first paragraph. For competitive negotiation, the text builds on the grounds you chose.


​

One search and filters as chips when you invite suppliers

Improved. When you invite suppliers, you start with one search on name or organisation number and add filters from the filter menu only when you need them. Selected filters are shown as chips, and search and filters give you one list of matches to invite from.


​

First negotiation round to all tenderers

Improved. In a competitive negotiation under FOA Part III, the first negotiation round goes to all tenderers still taking part, unless the notice reserved the right to reduce the number. A tenderer who is taken out gets a letter with the reasons, even when the round has not been sent. The last tenderer cannot be taken out, and a negotiation round cannot be changed after the award.


​

Confirmation before you answer one supplier privately

Improved. In a public procurement you confirm before answering one supplier privately, and the confirmation reminds you that information about the tender documents must go to everyone. A question that has already been answered cannot get a private answer from an old tab. “Anonymize and send to all” now includes the attachments to the answer.


​

Rejection under Part I without sections that do not apply

Fixed. In the simplified flow you reject a tender with the justification alone, without choosing a ground for rejection from FOA Part II or III. The letter builds on the procurement documents and anskaffelsesloven § 4, and rejection letters under Part I no longer have a section on the right to complain.


​

Protocol and award letters built on what you have already written

Improved. You write the selected tender's characteristics and relative advantages in the award confirmation, and the text is filled into the protocol and the award letters. The protocol also picks up the subcontractors from the winning tender and lists answers, clarifications and changes sent to the suppliers. A supplier rejected without the rejection being final gets the same reasons as the others, and you can adapt the text in that one letter.


​

Updated documentation from the selected supplier before award under Part III

Improved. In a procurement under FOA Part III, you record that updated documentary evidence has been obtained and checked for the selected supplier before the award, and the protocol shows it. The award waits until this is recorded, with a reference to FOA § 17-1 (5). The requirement also applies to mini-competitions under Part III.


​

Utility procurements below the EEA threshold all the way through

Improved. A procurement under forsyningsforskriften below the EEA threshold now runs as Part I and can be announced on Doffin and carried through to the end. The value basis, regulation and service category are kept when the draft is moved between flows.


​

A contract for each winner when there are several

Fixed. When a competition is awarded to several suppliers, its page shows which winners do not yet have a contract, and you create one contract per winner.


​

Maximum duration warnings that include extensions

Improved. The warning about framework agreements longer than four years now includes the extensions, and the value field reminds you that extensions must be included in the estimated value (FOA § 26-1 (4) and § 5-4 (1)). A framework agreement under forsyningsforskriften longer than eight years triggers a warning and asks for a justification. The three-year limit for reserved contracts counts the end date as the last day.


​

Smaller improvements and fixes

  • Improved. The estimated value and the maximum value of a framework agreement can be changed with “Change the announcement” as long as the value stays within the same part of the regulations.

  • Improved. Contract award notices, voluntary ex-ante transparency notices and qualification systems under forsyningsforskriften are accepted by Doffin.

  • Improved. The tender validity period is set in one place, in the “Process flow and milestone plan” card on the procedure step.

  • Improved. You can choose that a preceding open or restricted tender only produced unacceptable tenders (FOA § 13-2 letter e) as grounds for competitive negotiation, and the protocol cites the correct provision.

  • Fixed. The rejection letter to an applicant to a dynamic purchasing system or qualification system says that the application for admission is declined, and a decision sent in a qualification system can no longer be overwritten.

  • Improved. The Doffin notice states the deadline for questions you have set, so suppliers can see it there too.

  • Improved. The deadline for requests to participate in a published two-stage procedure is moved through a change notice, and the new deadline is shown straight away.

  • Improved. Procurements below NOK 500,000 are marked as below the threshold in anskaffelsesloven, not as “Del I procurement”.

  • Fixed. Publishing is stopped if the justification for an exception from climate weighting still contains an instruction from the standard text, even when more text follows it.

  • Improved. The “Part of a framework agreement” link below the title of a draft mini-competition takes you back to the framework agreement.

  • Improved. Before a contract is concluded after a voluntary ex-ante transparency notice, you are asked whether an interim injunction has been requested (anskaffelsesforskriften § 25-3 (1) b).

  • Improved. A competition cannot be published with a contract period that ends before the tender deadline.

  • Fixed. The start and end dates of the validity period of a qualification system or dynamic purchasing system can be cleared and set again.

  • Improved. If your organisation has no contact phone number, a phone number for the responsible buyer is enough to publish to Doffin.

  • Fixed. “Suggest a congratulatory note” and the award letter in FOA Part I no longer mention a standstill period when the procurement has none.

  • Fixed. The maximum value of a published framework agreement competition can no longer be changed with an ordinary edit, and it decides whether a framework agreement for special services gets the EEA obligations.

  • Improved. A copy of a competition does not invite suppliers who only registered interest in the original.

  • Fixed. Procurements under forsyningsforskriften refer to forsyningsforskriften § 7-9 for the climate rule, and to Part II in the block on framework agreements longer than eight years.

  • Fixed. Milestones set a number of days from another milestone land at 23:59 Norwegian time even when daylight saving time changes, and minimum deadlines are counted in whole days from the planned notice.

  • Improved. The “Procedure” step sorts the procedures into three groups and shows only the ones you can choose.

  • Improved. A notice is registered before it is sent, so a slow response from Doffin cannot cause it to be lost or sent twice.

  • Fixed. The row menu with preview and download in the document tables stays fixed at the right edge of the card.

  • Fixed. A start date in the past under “Contract period” is no longer changed to today without notice, and the contract cannot start before the tender deadline.

  • Fixed. A tender whose minimum requirements have not been fully assessed is marked “Minimum requirements not assessed”.

  • Fixed. “Mark as approved” in the award letter is no longer hidden behind the hint about justification per criterion.

  • Fixed. The message about a too short tender deadline refers to the procedure's own section, for example FOA § 20-4 for competitive negotiation.

  • Fixed. An award under FOA Part I no longer offers a standstill period, so you can confirm the award straight away.

  • Fixed. Negotiation rounds stay in the right order, with only one draft round at a time, and a draft can be discarded.

  • New. You can see how many suppliers have read the information you sent, and who first read messages, questions and answers.

  • Improved. Special services and health and social services under forsyningsforskriften follow Part I below NOK 11.6 million and Part III from NOK 11.6 million.

  • Fixed. The browser's Back button goes to the previous tab, and the selected negotiation round is remembered when you open a tender and go back.

  • Fixed. In an open tender, the button in the Now panel completes the qualification once all suppliers are qualified or rejected.

  • Improved. A new “Publish to Doffin” is refused while the procurement is waiting for a response, and a contract award notice dated today is accepted even just after midnight.

  • Fixed. When a framework agreement competition is awarded to several suppliers, all of them are listed as the selected supplier in section 7 of the protocol.

  • Improved. A dynamic purchasing system cannot be published with dates that do not fit together, and the error is shown below the date that needs changing.

  • Improved. The start date and contract period are kept when you answer “Yes” to whether the contract has a defined end.

  • Improved. In a mini-competition under a framework agreement under FOA Part II, SourceMagnet asks for updated qualification documentation from the selected supplier (FOA § 8-10 (2)).

  • Improved. The justification for a framework agreement longer than four years under FOA Part III is sent with the notice, so Doffin accepts it.

  • Improved. If Doffin is down or overloaded, you are told that the problem is at Doffin's end and whether anything was sent.

  • Improved. Under forsyningsforskriften Part I, restricted procedures and competitive negotiation are also offered, and under Part III dynamic purchasing systems and qualification systems are no longer offered.

  • Improved. The procurement list has the columns “Procedure” and “Regulation”, shown by default under “Announced”.

  • Fixed. The award letter for a competition under a dynamic purchasing system under forsyningsforskriften states that no standstill period applies (§ 21-2 (2) d).

  • Improved. Contract conclusion notices under Part IV and national notices under Part II where climate and the environment are covered in the requirements specification are accepted by Doffin.


​

Contracts

Contracts and competitions to Excel

New. Take the list further in Excel, just as you see it. From “Download” in the contract list or “All procurements”, you get every match for the filter and search across all pages, in the same sort order and with the visible columns in the same order, including custom fields. Dates are Excel dates, amounts are numbers, and the title links to the contract or competition.

Downloading the contract list to Excel

Download the contract list to Excel from the “Download” menu.


​

Saved reports and downloads in Excel, CSV and PDF

New. Set up the view once and reopen it with today's data. “Save as report” saves filters, columns and sorting under a name, and the report opens from “My reports”. The contract register, the list of competitions and the task list can be downloaded as Excel, CSV or PDF, with the rows and columns you see on screen. A report can be shared with named colleagues, who see it with their own access.

Saved reports and downloading the contract register

Save a view of the contract register as a report, and open it again from “Reports”.


​

Project overview: purchasing per project

New. You see how purchasing in each project is going, and where something is missing. The “Projects” tab under Overview shows, among other things, projects starting within 90 days, projects without a purchasing lead, contracts expiring before the project ends and products without a competition, and on the project page “Procurement in the project” gathers contracts, competitions per phase and products. Each figure opens the list behind it, the overview can be downloaded as Excel and the project section as PDF, and everything counts only what you have access to. Requires the Projects module.

The project overview with key figures and contract value per project

The project overview shows the key figures and the contract value per project.


​

Quick contract search from the home page

New. Find the contract you are looking for straight from the home page. As you type, the search field shows the first matches on title, counterparty, project, the counterparty's contact person or reference number, and each match opens the contract. If your organisation has the assistant, “Ask the assistant” sends what you typed to it as a question.


​

Contract from an awarded competition with everything the competition knows

Improved. You don't have to retype what the competition already knows: a contract created from an awarded competition brings along the title, description, currency, period, options, projects and the competition's own documents. The awarded value goes into “Total price” with decimals, while “Estimated total value” keeps the estimate. A period in months ends on the last day of the period.


​

Amount filters for contracts, and the assistant finds contracts on every field

Improved. In “All contracts” you filter “Estimated value”, “Total price”, “Price per month”, “Price per year” and “Total liability” with “From” and “To”, and filters on your own contract fields now count correctly. The assistant finds contracts on every field the contract list can be filtered on, and answers about the termination deadline with the date the contract page shows. This feature is in early access. Contact us if you would like to try it.


​

Reports straight from the list, and firm reports for the whole organisation

Improved. The reports you need are right in the list: “Reports” in the lists of contracts, competitions and contract tasks opens your own reports, those shared with you, and the organisation's reports. An administrator can save a report for the whole organisation, and it appears first under “Firm reports”. The status buttons in the contract list and “Active contracts” in the menu have been replaced by five fixed firm reports.


​

Extensions with timeline and status

New. On the contract you see the current end date, the end date with all extensions, the next deadline and a timeline with the status of each extension. As the manager, you exercise or decline an extension directly from the view, without edit mode. If one is declined, the later extensions lapse and their reminders stop.


​

Resending a cancelled signing

New. A cancelled signing gets going again quickly: “Resend to the same signers” fills in the same document, signers and attachments, so you only set a new deadline. The document list on the contract updates immediately after sending, cancelling or changing the deadline.


​

Extensions entered in years or months

Improved. You register each extension as a length in years or months and a deadline in months before the contract expires, and the period and deadline date are calculated for you. Dates can still be set by hand when the contract says otherwise. A contract created from an awarded competition brings the extensions along without them having to be typed in again.


​

The same filter bar in every list, and search across the whole contract list

Improved. “Search the table” now searches all pages of the contract list by title, counterparty, contract number, project, responsible person and department, and highlights the matches. Filters appear as chips above the table, with “+ Filter”, “Reset filters” and the number of matches, and the list uses the full screen width. The same filter bar is now used in the list of competitions, contract tasks, “Needs overview”, “All projects” and “Framework agreements”.


​

IFRS 16 report with a choice of contracts, internal party and period

Improved. You create the IFRS 16 report without filtering and ticking boxes in the contract list first: choose the period, internal party and contracts directly in the dialog. The preview shows the contracts the report covers, and next time the dialog remembers which contracts were left out.


​

Copied contract with counterparty and contact person

Improved. A contract you copy with “Copy” keeps the counterparty and contact person, and both are marked as copied from the original. When you register a contract, “Counterparty contact person” now sits right below “Counterparty”.


​

Fixed colours in the text editor

Improved. Documents look the same across colleagues, because text colour and highlighting are now chosen from a small palette of preset colours instead of the operating system's colour picker. The palette can also remove colour and can be used with the keyboard.


​

Smaller improvements and fixes

  • Improved. The framework agreement shows who is responsible, and with edit access you can change the responsible person so reminders go to the right colleague.

  • Fixed. The deadline panel on the home page no longer shows “No deadlines coming up” while older deadlines have passed, and points to “Show earlier” instead.

  • Improved. When the counterparty gives a contract task to someone outside its own organisation, it is told that it can no longer edit the task and must confirm first.

  • Fixed. Contract searches and filters containing “?” no longer fail, and links saved earlier still open with their filters.

  • Fixed. Signing no longer stops when an attachment cannot be merged with the main document, as the attachment is then sent separately.

  • Improved. Search and filter menus in a column are no longer cut off when a search returns no matches, and they can be used with the keyboard.

  • Fixed. “Price per month”, “Price per year” and “Total liability” on the contract now save amounts with decimals.

  • Improved. “Upcoming option deadlines” shows the right number of days, also around the switch to winter time.

  • Fixed. “New contract” with AI always opens the editor with the title and description the AI filled in.

  • Improved. A filter with a single selection shows the value with the name you see in the list.

  • Improved. “All contracts” now opens even when many custom fields are shown as columns, and the download includes all the columns.

  • Improved. If you change the counterparty on a contract, the contact person from the previous counterparty is removed.

  • Improved. Filters on person, contact details and linked items respond faster in large contract registers.

  • Fixed. When you upload several files at once to a contract or project, all of them are saved, and an empty file is rejected with its file name.

  • Fixed. Expired signing requests can be deleted, including those that expired before June 2026, while a signed request is never deleted.

  • Improved. “Cancel signing” and deleting custom contract fields, field options or contract reminders now ask for confirmation first.

  • Improved. If the organisation no longer has the contract module, new call-offs and new suppliers on old framework agreements are blocked straight away, not after the form has been filled in.

  • Fixed. Autofill right after loading a template now fills in the template instead of giving an empty document.


​

Supplier portal

Outcome first in the award letter

Improved. In a public procurement, the supplier sees the winner, its own ranking and the text on the standstill period and complaints only once the award letter has been sent. Until then, neither the supplier portal nor search shows the competition as decided. A rejected supplier also receives the award notification once the award has been decided.


​

“Find procurements” with what the supplier can take part in first

Improved. The supplier sees the procurements still open for participation straight away, with the nearest deadline first: “Find procurements” now opens on “Open”. The filters “Open”, “In progress” and “Closed” show counts. Each card shows the deadline that applies to the supplier and what the supplier can do now, also for dynamic purchasing systems with continuous admission.


​

An easier way to an account for new suppliers

Improved. New suppliers get started more easily: a supplier without an account who opens a request sees straight away how to create one, instead of being sent to Entra ID. From registration you can get back to sign-in, the organisation number field opens the number keypad, and sign-in clearly says when the email or password is wrong.


​

Smaller improvements and fixes

  • Improved. Price fields in the bid show the currency the contract will use, and a price in another currency is rejected with a message to the supplier.

  • Improved. An invited participating company sees what the invitation is about and accepts it with “Accept invitation”, not just by opening the link.

  • Improved. Each step of the supplier's application, request to participate or bid opens at the top, with the first question visible.

  • Improved. The card for a qualification system on “Find procurements” shows the date the system expires, instead of the deadline for requests to participate.

  • Improved. “Complete it” in the application summary opens at the first unanswered item, and all unanswered items are marked as missing.

  • Fixed. If the buyer closes an openly published request while the supplier has it open, the supplier sees “The competition is closed” instead of being told it does not exist.

  • Fixed. In English, the list of public procurements shows procedures and other values with readable names instead of codes.

  • Improved. In a mini-competition, the supplier sees the outcome, the winner and its own ranking only once the award letter has been sent.

  • Improved. In procurements under forsyningsforskriften, the questions on grounds for exclusion in the self-declaration and the wizard now refer to forsyningsforskriften § 20-2.

  • Improved. On a phone, the call-off table on a supplier's framework agreement shows that it can be scrolled sideways.

  • Fixed. Rejected applicants to a dynamic purchasing system or qualification system see the full rejection letter in the portal and the email, with the legal basis, the contracting authority's message and the right to complain.


​

Needs

From reported need to competition or call-off

New. You get control of needs from the moment they are reported: they land in a shared queue, where a buyer takes the need and becomes responsible for it. The buyer turns the need into a competition, starts a call-off or a mini-competition with “Use a framework agreement”, or schedules it for a month, and the chosen attachments, CPV codes and value come along. The person who reported the need is alerted when its status changes, and those who can approve are alerted when a need is reported. Requires the Needs module.

A need with the buyer and the options for what happens next

Once the buyer has taken the need, they choose what happens next.


​

Return, reasoned rejection and drafts in needs reporting

Improved. A need that only needs correcting can be sent back to the person who reported it with a comment, and a rejection must be given a reason. The reporter sees the reason and can correct the need and send it again, or withdraw it. Drafts that have not been sent now appear in “My needs” and on the home page, and the reporter can delete their own draft.


​

Smaller improvements and fixes

  • Improved. A member who cannot assess needs sees only the needs they reported themselves, also via a pasted link.

  • Improved. When a draft created from a need is discarded, the need returns to approved and can be taken forward again.

  • Improved. Planned needs whose start month has passed are marked “Passed” on the need and in the lists.


​

AI and assistant

“Create with AI” for new competitions

New. You can start a new competition by answering questions from the AI. “Create with AI” asks “What do you have?”, and you can start from a need, your own documents or an earlier competition or contract: the AI fills in what it can, asks about the rest with clickable options and explains each recommendation. You confirm the choices that steer the process yourself before the draft is saved, and “Fill in yourself” takes you to the form whenever you want. This feature is in early access. Contact us if you would like to try it.

“Create with AI” asks “What do you have?”

Start from a need, your own documents or an earlier competition or contract.


​

“Help me with this step” in the wizard

New. Get a suggestion for the content of each step instead of starting from an empty field. “Help me with this step” opens a new conversation in the assistant with the step and what you have already filled in, and the suggestion fills in the fields when you confirm. On “Documents”, the assistant can write a whole document, even a long one in several parts, and the change card shows the weight of each sub-criterion before anything is saved. This feature is in early access. Contact us if you would like to try it.

“Help me with this step” suggests minimum requirements

The assistant suggests minimum requirements, both from the requirement library and its own.


​

New menu, and the assistant beside the page

New. The side menu can be collapsed to icons, “Help” sits in the menu, and language and “View as role” have moved to the user menu. If your organisation has the assistant, the panel sits beside the page instead of on top of it, a closed conversation stays as a small chip, and you can correct a suggested value before you confirm it. This feature is in early access. Contact us if you would like to try it.


​

AI help gathered in the assistant where you work

New. “Chat with document” now opens the assistant with the document as the topic, and the assistant reads the whole document and cites the page as its source. Contracts, competitions and projects have “Ask the assistant”, “Ask further” brings an AI result into the conversation, and competitions, contracts, tasks, needs and suppliers that the assistant mentions are links. This feature is in early access. Contact us if you would like to try it.


​

AI insight that reads the attachment behind a minimum requirement

Improved. When a supplier answers a minimum requirement with an attachment, AI insight assesses the requirement based on what the document shows, not on the supplier's “Yes”. A certificate issued to a different company than the supplier is flagged as a possible deviation, and plain text attachments are read as well. This feature is in early access. Contact us if you would like to try it.


​

Conversations in a side column and clickable lists in the assistant

Improved. On the assistant page, conversations sit in a fixed column beside the chat with “New conversation” always visible, and each row in a list from the assistant opens the contract, competition or project in one click. A conversation is saved while the answer is being written, so it does not disappear if you close the tab. This feature is in early access. Contact us if you would like to try it.


​

Smaller improvements and fixes

  • Improved. AI insight flags bid documents it could not read, so you know what to check by hand. This feature is in early access. Contact us if you would like to try it.


​

Notifications

Alert when call-offs approach the maximum value

New. You are told when call-offs under a framework agreement approach its maximum value: the administrator can set default alerts that go out when call-offs reach a chosen share, for example 50, 80 and 100 percent, each with its own recipients. The alerts are set up in the same place and the same way as the other default alerts for contracts. A share that was already passed before the alert was saved does not trigger an alert.


​

Custom value reminders on a framework agreement

New. Whoever manages a framework agreement can add their own reminders for when call-offs reach a chosen share of the maximum value, each with its own recipients. The agreement page shows the agreement's own reminders and the organisation's default reminders separately, and anyone covered by both at the same share gets one alert.


​

Link straight to the new question

Improved. You go straight to the supplier's question: the link in the email and the alert opens it under Communication › Questions, highlighted and visible on screen. The address of an opened question can be shared with a colleague who has access, and if the question no longer exists, the page says so.


​

Unread filter and mark as read for alerts

Improved. You tidy up your alerts without opening each one: on “Alerts” you can show only unread ones, also those older than the last 20, and mark each alert as read or remove it. “Mark all as read” also works on “Alerts”, and the number on the bell goes down when an alert is removed.


​

Smaller improvements and fixes

  • Improved. Notification settings show roles with the same names as the user page, not code names.

  • Fixed. The alert about a final negotiation round now says that it is the final round, when the deadline is, and that it is the last chance to change the bid.

  • Improved. The button in emails from SourceMagnet has more space around it, so it stands out from the text.


​

Companies

Search by organisation number in the company list

Improved. You find a company by its organisation number, written with or without spaces. The same search field searches both names and organisation numbers.


​

Smaller improvements and fixes

  • Improved. Merging companies with the same organisation number shows who gets access and with which role, before you confirm.

  • Fixed. The country on a company your organisation registered can now be changed, so a supplier registered with the wrong country can be corrected without being deleted and created again.

  • Fixed. The link to the company in the email about a merged company now opens the company that was kept.

  • Fixed. The dialog for merging two companies with the same name clearly shows which one is archived, which is kept and what is moved.


​

Settings

Audit log for your organisation

New. Owners and administrators get an overview of what happens in the organisation, gathered under Access management › “Audit log”. The log shows changes, sign-ins, publishing and status changes, opening of bids, downloads and exports, access granted and removed, and use of AI and the assistant. You filter by period, person and event type and download it as Excel, CSV or PDF. The log cannot be changed or deleted afterwards, and it starts with this update.

The audit log with filters for period, person and event

The audit log shows who did what and when, and can be filtered by period, person and event.


​

Departments

New. You give people access to just their department: under Access management › Departments, the administrator creates departments and assigns roles per department, and a department role only reaches what belongs to that department. When the organisation has several departments, users choose a department when they create a project or a contract. A department administrator can open Access management without being an administrator for the whole organisation, and new Entra ID connections use the default department.

A department with the people who have access and their roles

Each department shows who has access and which roles they have there.


​

Better accessibility

Fixed. The issues found in our own review of the most important views for buyers and suppliers are fixed: stronger contrast, headings and a skip link, and names on buttons, filters, charts and answer fields that a screen reader reads aloud. The overview on the home page can be used with the keyboard, the browser can autofill the registration, and the search shortcut is now Ctrl+K (⌘K on Mac).


​

AI skills and AI usage for administrators

New. Administrators get an overview of the AI the organisation has and how much of it has been used: under Settings › “AI skills”, each AI skill is listed with a sentence on what it does, together with those available as add-ons. From an add-on, the administrator can send “Ask for access”. The page also shows how large a share of the month's fair use the organisation has used.


​

Smaller improvements and fixes

  • Improved. The organisation's default department is now called “Felles” instead of “Default”, unless you have given it a name of your own.

  • Fixed. Automatic translation in Microsoft Edge no longer makes the app crash.

  • New. SourceMagnet's operational status is shown at status.sourcemagnet.com, where you can subscribe to alerts about outages.

Did this answer your question?